CCM_RecentlyUsedApps Update on Unicode Strings

The research and development that I did previously for the CCM_RecentlyUsedApps record structure and EnScript carving tool was done against case data I was using during investigations. Unfortunately, I had no data available with any of the string data having been written in Unicode characters. With the thought that Windows has been designed with international languages in mind, I used the UTF8 codepage when reading to hopefully catch any switch to Unicode type characters. Using UTF8 is a very safe alternative to ASCII because it defaults to plain ASCII in the lower ranges, and starts expanding bytes when it gets higher. I have an update, however, because I got a volunteer from twitter to graciously do some testing. Thanks @MattNels for the help!

The Tests

The first test that he ran was using characters that were not in the standard ASCII range. The characters like ä or ö are latin based characters with the umlaut dots above, and they fall within the scope of ASCII when you include both the low and the high ranges.

He created a testing directory on his system, which is under the management of his company’s SCCM deployment services. If you recall from my prior posts on this subject, this artifact is triggered simply by being a member. In this directory, he renamed an executable to include the above mention characters from the high ASCII range. The result show that the record stored those high characters exactly the same as the low range characters. You can see what that looks like in the following image.

The next test he ran was to rename that executable again to something high enough in the Unicode range to get clear of the ASCII characters. He went with “秘密”, which consists of two glyphs 0x79d8 and 0x5bc6. Keeping in mind our CPU architecture, we know that those bytes have to be swapped when written to disk as Unicode characters. The text would translate to four bytes on disk as: d8 79 c6 5b.

Another option, going with my earlier assumption/guess, is for the string to be written using UTF8. The use of UTF8 is pretty common on OS X, and less common on Windows, from my experience. Nevertheless, it would be worth being prepared to see what the bytes would look like if it was UTF8. The above glyphs translate into six bytes on disk, three for each character, but we don’t swap the bytes around like we did with Unicode. Confusing, right? Anyways, those bytes would look like this on disk: E7 A7 98 E5 AF 86.

Drumroll please…

The result was evidence of switching to Unicode. You can immediately recognize it as Unicode because of the 0x00 bytes between the extension “.exe” of that file. If you use a hex->ASCII converter on the Unicode bytes from above (d8 79 c6 5b) you get back “ØyÆ[“, which lines up nicely with the following image.

Now you ask: How do we programmatically determine if the string was written using Unicode or ASCII? Excellent question, and I am glad that you are tracking with me!

Let’s expand the view of this record a bit, and recall the structure of the format from the last post. The strings in Windows are typically followed with a 0x00 (null) byte to indicate where the string data stops. It is referred to as C style strings because this is how the C programming language stores strings in memory. In this record however, the strings were separated byte two 0x00 bytes. Take a close look at the following image of the expanded record with the Unicode string.

Did you spot the indicator? Look again at the byte immediately preceding the highlighted string data, and you will see that it is a 0x01 value. This byte has been a 0x00 value in all of my testing because I didn’t have any strings with Unicode text in them, or at least not to my knowledge. Since executables need to have these latin based extensions, the property will actually look to be ending with three 0x00 bytes. The first of those is actually part of the preceding ‘e’. Since this string has been written entirely in Unicode, the null terminating character mentioned just above gets expanded as well. The next byte is then either a 0x00 or 0x01 indicating the codepage for the next string property.

An interesting side note on a situation that Matt ran into, the use of the path “c:\test2\秘密\秘密.exe” for the executable resulted in no records indicating execution. He ran a number of tests surrounding that scenario, and there is something about that path that prevents the recording.

He continued with changing the path to “c:\秘密\秘密.exe”, and the artifact was back. We wanted to get confirmation of that 0x01 indicator byte using another string value. Sure enough, we got it in the following image.

Tool Update

The EnScript that I wrote to carve and parse these records has been updated to properly look for the 0x00 and 0x01 bytes indicating ASCII or Unicode usage. Please reach out to me if you find any problems or have any questions.

Additionally, Matt is adding this artifact to his irFARTpull collection PowerShell. These artifacts can be collected by having PowerShell perform a WMI query against the namespace and class where these records are stored. It should look something like this:
Get-WmiObject -namespace root\ccm\SoftwareMeteringAgent -class CCM_RecentlyUsedApps

Lessons Learned

This is a perfect example of being aware of what your tools are doing behind the scenes and always validating and testing them. Many of the artifacts that we search for and use to show patterns of behavior are detailed through reverse engineering. This process can be helpful, but it can also be a bit blind in not being able to analyze what we don’t have available.

If you aren’t a programmer, you can still contribute with testing, or even just thoughts on possible scenarios of failure. Hopefully the authors of the tools out there will be accepting of the feedback, as it will only provide more benefit for the community.

James Habben
@JamesHabben

Windows Prefetch: Tech Details of New Research in Section A & B

I wrote previously with an overview about the research into Windows prefetch I have been working on for years. This post will be getting more into the technical details of what I know to help others take the baton and get us all a better understanding of these files and the windows prefetch system.

I will be using my fork of the Windows-Prefetch-Parser to display the outputs in parsing this data. Some of the trace files I use below are public, but I didn’t have certain characteristics in my generated sample files to show all the scenarios.

Section A Records

I will just start off with a table of properties for the section A records, referred to as the file metrics. The records are different sizes depending on the version. I have been working with the newer version (winVista+) and it has just a tad more info than the xp version.

Section A Version 17 format (4 byte records)

0 trace chain starting index id
4 total count of trace chains in section B
8 offset in section C to filename
12 number of characters in section C string
16 flags

Section A Version 23 format (4 byte records, except noted)

0 trace chain starting index id
4 total count of trace chains in section B
8 count of blocks that should be prefetched
12 offset in section C to filename
16 number of characters in section C string
20 flags
24 (6) $MFT record id
30 (2) $MFT record sequence update

As you can see between the tables, the records grew a bit starting with winVista to include a bit more data. The biggest difference is in the $MFT record references. Very handy to know the record number and the sequence update to be able to track down previous instances of files in $Log or $UsnJrnl records. The other added field is a count of blocks to be prefetched. There is a flag setting in the trace chain records that allows the program to specify if a block (or group) should be pulled fresh every time, somewhat like a web browser.

The flag values seem to be consistent between the two versions of files. This is an area that applies a general setting to all of the blocks (section B) loaded from the referenced file, but I have seen times where the blocks in section B were assigned a different flag value. Mostly, they line up. Here are the flag values

Flag values (integer bytes have been flipped from disk)
0x0200    X    blocks (section B) will be loaded into executable memory sections
0x0002    R    blocks (section B) will be loaded as resources, non-executable
0x0001    D    blocks should not be prefetched

You can see these properties and the associated filenames in the output below. You will notice that the $MFT has been marked as one that shouldn’t be prefetched, which makes a lot of sense to not have stale data there. The other thing is that there are a couple DLL files that are referenced with XR because they are being requested to provide both executable code and non-executable resources.

Section B Records

This section has records that are much smaller, but there is so much more going on. The most exciting part to me is the bitfields that show a record of usage over the last eight program runs. You have probably seen these bitfields printed next to the file resource list of the python output when running the tool, but that data is not associated with either the filename in section C or the file metrics records in section A. These bitfields are actually tracking each of the block clusters in section B, so the output is actually a calculated value combined from all associated section B records. I will get to that later. Let’s build that property offset table first. These records have stayed the same over all versions of prefetch so far.

Section B record format

0 (4) next trace record number (-1 if last block in chain)
4 (4) memory block offset
8 (1) Flags1
9 (1) Flags2
10 (1) usage bitfield
11 (1) prefetched bitfield

The records in this section typically point to clusters of 8 512 blocks that are loaded from the file on disk. Most of the time, you will find the block offset property walking up in values of 8. It isn’t a requirement though, so you will find intervals smaller than that as well.

Here is an example of these records walking by 8.

Here is an example of one record jumping in after 2.

Here is an example of a couple sequential records, jumping only by 1.

I broke the two flag fields up early on just to be able to determine what was going on with each of them. What I found out was that Flags2 is always a value of 1. I haven’t seen this change ever. Without a change, it is very difficult to determine the meaning of this value and field. I have kept it separate still because of the no change.

The Flags1 field is similar to the Flags field that is found in the section A records. It holds values for the same purposes (XRD), though the number values representing those properties aren’t necessarily the same. It also has a property that forces a block cluster to be prefetched as long as it has been used at least once in the last eight runs. I will get into more later about the patterns of prefetching that I have observed, but for now let’s build the table for the properties and their values.

0x02    X    blocks are loaded as executable
0x04    R    blocks are loaded as resources
0x08    F    blocks are forced to be prefetched
0x01    D    blocks will not be prefetched

Now I get to show my favorite part: the bitfields for usage and prefetch. They are each single byte values that hold eight slots in the form of bits. Every time the parent program executes, the bits are all shifted to the left. If this block cluster is used or fetched, the right most bit gets a 1; otherwise it remains 0. When a block cluster usage bitfield ends up with all 0, that block record is removed and the chain is resettled without it.

Imagine yourself sitting in front of a scrabble tile holder. It is has the capacity to hold only eight tiles, and it is currently filled with all 0 tiles. Each time the program runs and that block cluster is used, you put a 1 tile on from the right side. If the program runs and the block cluster is not used, then you place a 0 tile. Either way, you are going to push a tile off the left side because it doesn’t have enough room to hold that ninth tile. That tile is now gone and forgotten.

Prefetch Patterns

The patterns listed below occur in section B since this is where the two bitfields are housed. Remember that these are for block clusters and not for entire files. Here are some various scenarios around the patterns that I have seen. The assumption is neither the D or F property assigned unless specified. Also, none of these are guaranteed, just that I have observed them and noted the pattern at some point.

Block with the F (force prefetch) property assigned, after 1 use on 8th run:
10000000    11111111

Block with the D (don’t prefetch) property assigned, after a few uses:
01001011    00000000

Block that is generally used, but missed on one:
11011111    11111111

Block on first use:
00000001    00000000

Block on second run, single use:
00000010    00000001

Block on third run, single use:
00000100    00000011

Block on fourth run, single use:
00001000    00000110

Block used every other run:
01010101    00111111

Block used multiple times, then not:
01110000    00111111

Block used multiple times, but only one use showing:
10000000    11100000

More Work

I am excited to see what else can be learned about these files. My hope is that some of you take this data to test it and break it. You don’t have to be the best DFIR person out there to do that. All you need is that drive to learn.

James Habben
@JamesHabben

Windows Prefetch: Overview of New Research in Sections A & B


The data stored in Prefetch trace files (those with a .pf extension) is a topic discussed quite a bit in digital forensics and incident response, and for good reason. It provides a great record of the executables that have been used, and Windows is configured to store them by default for workstation systems. In this article, I am going to add just a little bit more to the type of information that we can glean from one of these trace files.

File Format Review

The file format of Prefetch trace files has changed a bit over the years and those changes have generally included more information for us to take advantage of in our analysis. In Windows 10 for example, we were thrown a curve ball in that the prefetch trace files are now being stored compressed, for the most part.

The image below shows just the top portion of the trace files. The header and file information sections have been the recipient of the most version changes over the years. The sections following are labeled with letters as well as names according to Joachim’s document on the prefetch trace file format. The document does state that the name of section B is only based on what is known to this point, so it might change in the future. I hope that image isn’t too offensive. Drawing graphics is not a specialty of mine.

New Information, More Work

The information that I am writing about here is the result of many drawn out years and noncontiguous time of research. I have spent way too much time in IDA trying to analyze kernel level code (probably should just bite the bullet and learn WinDbg) and even more time watching patterns emerge as I stare deeply into the trace file contents. It is not fully baked, so I am hoping that what I explain here can lead to others, smarter than me, to run with this even further. I think there is more exciting things to be discovered still. I have added code to my fork of the windows-prefetch-parser python module, which I forked a while back to add SQLite output, and I will get a pull request into the main project in short time. This code adds just a bit of extra information in the standard display output, but there is also a -v option to get a full dump of the record parsing. (warning, lots of data)

File Usage – When

The first and major thing that I have determined is that we can get additional information about the files used (section C) in that we can specify which of the last 8 program executions took advantage of each file. We have to combine data from all three sections (A, B, and C) in order to get this more complete picture, something that the windows prefetcher refers to as a scenario. This can also help to explain why files can show up in trace files and randomly disappear some time later. Take a look at this image for a second.

This trace file is for Programmer’s Notepad (pn.exe) and was executed on a Windows 8 virtual machine. I created several small, unique text files to have distinct records for each program execution. I used the command line to execute pn.exe while passing it the name of each of those text files. I piped the output into grep to minimize the display data for easier understanding here.

There are two groups of 8 digits, and these are a bitfield. The left group represents the program triggering a page fault (soft or hard) to request data from the file. The right group represents the prefetcher doing a proactive grab of the data from that file, as this is the whole point to have data ready for the soft fault and to prevent the much more costly hard fault. In typical binary representation, a zero is false and a one is true. Each time the program is executed, these fields  are bitshifted to the left. This makes the right side the most recent execution and each column working left is the scenario prior, going up to eight total.

If you focus on an imaginary single file being used by an imaginary program, the bitfield would look like this over eight runs.
00000001
00000010
00000100
00001000
00010000
00100000
01000000
10000000

What happens after eight runs? I am glad you asked. If the value of this bitfield ends up being all zero’s, the file is removed from section C, and all associated records are removed from sections A and B. Interestingly, the file is not removed from the layout.ini file that sits beside all these trace files; not immediately, from what I have been able to determine.

If the file gets used again before that 1 gets pushed out, then the sections referencing that file will remain in the trace file.
00000001
00000010
00000100
00001000
00010001
00100010
01000100
10001000
00010000
00100001
01000010
10000100
00001000
etc.

File Usage – How

The second part, and the one that needs more research, is how this file was used by the executing program. There are some flag fields in both section A and B that provide a few values that have stuck out to me. There are other values that I have observed in these flag fields as well, but I have not been able to make a full determination about their designation yet.

The flag field that I have focused on is housed in section A. The three values that I have found purpose behind seem to represent 1) if a file was used to import executable code, 2) if the file was used just to reference some data, perhaps strings or constants, and 3) if the file was requested to not be prefetched. You will mostly see DLL files with the executable flag, although there are some that are referenced as a resource. You will find most of the other files being used as a resource.

In the output of windowsprefetch, I have indicated these properties as follows:
X    Executable code
R    Resource data
D    Don’t Prefetch

See some examples of these properties in the output below from pn.exe.

More Tech to Follow

I am going to stop this post here because I wanted this to be more of a higher level overview about the ways we can use these properties. I will be writing another blog post that gets into a little more gory detail of the records for those that might be interested.

Please help the community in this by testing the tool and the data that I am presenting here. Samples are in the GitHub repo. This has all been my own research, and we need to validate my findings or correct my mistakes. Take a few minutes to explore some of your system’s prefetch files.

You can comment below, DM me on twitter, or email me first@last.net if you have feedback. Thanks for reading!

James Habben
@JamesHabben

CCM_RecentlyUsedApps Properties & Forensics

UPDATE 2017-04-03: Unicode strings are used when needed. See the update post.

You can uncover an artifact from the deepest and darkest depths of an operating system and build a tool to rip it apart for analysis, but if everybody stares at it with a confused look on their faces it won’t gain acceptance and no one will use this new thing you did. Something about forensics, Daubert, Frye, etc., not to mention plain reasoning.

With that said, this post is a followup to my previous post about the Python and EnScript carving tools that can be used to analyze data from the WMI repository database, and more specifically, the class CCM_RecentlyUsedApps that is contained within. That post was about the structure of the records, and how to locate and then parse the meaningful data into property lists. This post is about what these properties mean and how they can be used.

Header Data

The indexing of the WMI repository uses hashes to better store and locate the various namespaces and classes in the file. These hashes are placed at the beginning of each of these records. The way the hashes are calculated are discussed in the previous post.

There are two date properties that are part of the record header, in the Microsoft FileTime format that occupies 8 bytes each. Both of these dates are stored in UTC. With these dates being part of the record header, they will be found on records in all types of classes, not just those being used with the CCM_RecentlyUsedApps tracking.

Timestamp1 indicates the last date the system had some sort of checkin or assessment from the SCCM server. It will be the same for all actively allocated records. You will very likely find previous dates on some records when using the carving method since there are records that get deallocated but not overwritten. The systems that I have analyzed these artifacts from have all had roughly a week between the various dates. I suspect this is a configuration setting that an SCCM admin would be able to modify.

Timestamp2 seems to indicate when the system was last initiated to join SCCM. This will be the same for all records, even with the carving method. The only reason this date would change on some records, was if the system was removed from being managed by SCCM and then joined again. This date has always lined up well, in my research and investigations, with other artifacts that support an action of joining an SCCM management group, such as services being created or drivers installed.

Numeric Record Data

There are 3 numeric properties stored in the record data: Filesize, ProductLanguage, and LaunchCount. None of these are going to sound any alarms on their own, but they can help paint the picture when combined with the rest of the properties.

Filesize is a four byte field that tracks the bytes of the executable for the record. Depending on if the developer used a signed type or unsigned, four bytes has a max value of 4GiB (unsigned) or 2GiB (signed). If you have a bunch of Adobe products on your systems, you might run into these size limitations, but every other program should be just fine for now. This field is end capped by other properties/offsets on both sides, so it’s not a question of reverse engineering (guessing) as how big it is. It is four bytes.

ProductLanguage is a four byte field that holds an integer related to the language designed by the developer. This sounds like a good possibility for filtering, but I have found tons of legitimate programs that have 0 for this field. I regularly see both 0 and 1033 on the systems I have analyzed.

LaunchCount is a four byte field that holds an integer representing the number of times this executable has been run on this system. I have seen programs with five digit decimal numbers on some systems! This won’t be common because one of the string fields tracked is the version of the binary. New version number, completely new record. Unlike Windows Prefetch, you won’t find a ton of articles written by idiots telling the world to delete all data associated with CCM_RecentlyUsedApps. Give it a couple months.

String Record Data

I don’t want to list out every one of the string properties here since many of them are really quite self-explanatory. I want to touch on a few that would either be very helpful or have some caveats that go with them. If any one of these properties were to change value for a binary, there will be a whole new record created for the new data.

ExplorerFilename is the name of the binary as it is seen by the filesystem. If this name changes, there will be a new record as stated above.

OriginalFilename is one of many strings that come from the properties contained in the binary data, usually towards the end of the file. You might think that comparing this field to the ExplorerFilename would be a good way of filtering your data down to those suspicious binaries, and I would applaud you for the thought process of getting there (that is getting into the threat hunting mindset). The reality is that there are a ton of legitimate programs distributed through legitimate channels that were compiled into a different filename than how it was packaged up before sending to you. (Slack, I am looking at you) It is one method of trying to digest this data that can lead to good findings, but it isn’t going to do your job for you. Many of the native Windows binaries have a ‘.mui’ appended after the ‘.exe’ in this field, just to throw us all off a bit.

LastUsedTime is a date time value stored as a string. The format is yyyyMMddHHmmss.000000+000, and I have not seen any timezones applied on any of the systems I have analyzed. There is a caveat with this property. The time recorded is the last time the program was running. Effectively, it is the last time the program was shutdown. I have confirmed this many times by multiple sources. One source is the log file created from our automated collection script, and I am able to lineup this timestamp with the end of the tool every time.

FilePropertiesHash is a great property when it exists. I haven’t been able to determine why, but some systems have a value filled in while others don’t. It is consistent within an environment in that all systems from a given customer either have it or don’t have it. The hash is in SHA1, and it is a hash of the binary data.

SoftwarePropertiesHash is a hash of something, but it is not the binary data. Also, it isn’t always there, though it tends to show up if the ‘msi’ prefix fields have values. I have had many records that have the FilePropertiesHash, but the SoftwarePropertiesHash is empty.

FolderPath has been an accurate property telling where the binary existed when it was executed. If the binary is moved, this record will become stale as a new one is created with the new path.

LastUserName tracks what appears to be the user account that was used to execute. I would still like to validate this a bit further, however. Every record that I have identified as critical to a case has been backed up by other artifacts showing this username executed the file. It may be the last user to have authenticated on the system before this executable was run, but I have not run into that scenario in order to dis/prove. Please let me know if you find this means otherwise.

Analysis Considerations

A few of my thoughts about analyzing this data. Please share your own.

Blanks

Many of the properties come from the section of the executable that stores properties about the program: CompanyName, FileDescription, FileVersion, etc. You might think that malware authors are lazy and leave these fields empty because they serve no purpose, and you would be correct part of the time. Looking for blanks can be one method, but it is not a guarantee. A few points:

Don’t assume all malware authors are lazy
Some malware these fields filled with legitimate looking data – #opsec
Remember that many attackers use the ‘Live off the land’ method of using what exists on the system
Many legitimate programs will leave these fields empty

Some legitimate programs I have run across in my analysis of this CCM_RecentlyUsedApps data that have blank fields are pretty surprising. These programs have been in categories across the board. I thought about providing a list of these executable names, but some are a bit sensitive. Instead, here is a list of some categorically.

Python binaries
Anti-virus main and secondary tools
Point Of Sale main and updater programs
Tons of DFIR tools
Java
Google Chrome secondary tools
Driver installers

On the opposite side, I have seen some advanced malware use these properties very strategically. There was one that even properly used the FileVersion field. I found records from different systems and places that showed 3 incriminating versions that were active on the network.

Name or Path

I noted this above, but keep in mind if after running an executable at least once that even a single character changes for either the name or path, the previous record is alienated and a new one is created. With the assumption that no data and only the name or path changed, the FilePropertiesHash can be used to find identical binaries.

Large Scale Aggregated Data

I designed the EnScript to be run against any number of systems and output the results to a single file. This gives the investigator the ability to perform analysis against the data in aggregation. Importing this data into a relational database (MSSQL, MySQL, SQLite, etc) gives a huge advantage when analyzing this data at scale. Outliers can be quickly identified through a number of different techniques.

For example, a simple ‘group by’ query that counts the number of systems that each executable has been run on can really jump start the findings.
Select distinct ExplorerFilename, FolderPath, count(EvFilename) as SystemCount
From tablename
group by ExplorerFilename, FolderPath
order by SystemCount

Excel pivot tables can provide similar analysis, though not quite as flexible.

I hope this is able to help some of you track things down a bit faster. We as an industry can use any help we can get to reduce the time between detection and remediation.

James Habben
@JamesHabben

Secret Archives of Execution Evidence: CCM_RecentlyUsedApps

UPDATE 2017-04-03: Unicode strings are used when needed. See the update post.

I seem to be running into more and more systems that have Windows Prefetch disabled for one reason or another. It is especially frustrating for me as a consultant since I cannot make the changes necessary to enforce the creation of the trace files nor can I implement any kind of central logging. Without this digital forensic artifact, it becomes increasingly difficult to build out a timeline of events across all the systems involved in an incident response.

One of the evidence sources that has shown itself over and over comes from a connection with a Microsoft SCCM server. SCCM has the ability to collect inventory data from many sources, and tracking executables launching is one. This feature isn’t turned on by default to have the SCCM server collect this data; however, the logging occurs on the endpoints regardless of the settings that are configured on the server.

If you search for CCM_RecentlyUsedApps, you will find tons of articles about configuring SCCM to collect this data or how to perform queries to extract the collected data. If you have the ability to push this in your organization, I say do it! If you can’t, then read on so I can show you how to take advantage of this data anyways.

Data Source

The records holding the information behind CCM_RecentlyUsedApps are stored in the collection of files that make up the database behind WMI. The locations are consistent from Windows XP through Windows 10, and you will find them here:
c:\windows\system32\wbem\repository\
c:\windows\system32\wbem\repository\fs\

I have even seen some systems that have what appears to be an old version of the WMI database. It seems to roll like the Windows Registry controlset keys. When the rebuild process kicks off, a new version of the database is built and it does not carry the previous information with it. I have seen up to 003, but it would likely go further. The previous versions look like this:
c:\windows\system32\wbem\repository.001\
c:\windows\system32\wbem\repository.001\fs\

This specific artifact was a very critical piece in a previous case. It allowed us to narrow the time window of the compromise to be much more specific. Even a single day of exposure can make a big difference in the fines against the victim company during a PCI Forensic Investigation (PFI).

You will see a handful of files in these locations. They are all used to link all the various records together to properly parse these. The guys at FireEye did some work on reverse engineering this database and released a python script to extract all of the available classes and namespaces. You can find their tool here:
https://github.com/fireeye/flare-wmi/tree/master/python-cim

Using this script, you can extract this data using these parameters:
Namespace: root\ccm\SoftwareMeteringAgent
Class: CCM_RecentlyUsedApps

This script was very helpful to me in a number of previous cases, although I have to mention that it is a bit of a pain to get installed properly. The other trouble that I ran into with this script, by no fault of the FireEye team, is that it can only parse the namespaces from the database if the data is not ‘corrupted’. I have found that imaging a live system can cause ‘corruption’ almost half of the time. It is frustrating to know that there are Indicator Of Compromise (IOC) hits inside that data blob, but the data won’t allow for the parsing.

Different Approach

As I manually looked over those seemingly lost IOC hits, I started to recognize patterns surrounding the hits. The fields holding all the property data seemed to be in the same order for all of the records of a certain system that I was reviewing at the time. I then pulled up a few systems with different OS’s from previous cases and found the same structure. YES!! The perfect setup for carving. Time to reverse engineer the record format.

The index uses a hash value in tracking and sorting structures that I won’t bore you with here. I mention though, because this hash is the piece that we will use to find these records. WinXP uses MD5 and newer uses SHA256. The hash in these records is generated from the class name CCM_RecentlyUsedApps, only the text needs to be upper cased as CCM_RECENTLYUSEDAPPS, and then converted to Unicode C\x00C\x00M\x00_\x00R\x00… (and you get the point).
WinXP MD5:
6FA62F462BEF740F820D72D9250D743C
WinVista+ SHA256:
7C261551B264D35E30A7FA29C75283DAE04BBA71DBE8F5E553F7AD381B406DD8

These hashes are what start the records. They are stored in Unicode themselves, for some reason. 128 bytes for the SHA256 and 64 bytes for the MD5.

The next 16 bytes following the hash are two 8 byte FileTimes.

After that will be 2 bytes to tell you the size of the data portion of this record. I have not seen any records using more than 2 bytes and the max size of 2 bytes is either 65,535 unsigned or 32,767 signed. Either of those provide plenty of space for this data, so I wouldn’t expect it to expand for size purposes. The data portion of the record includes these 2 bytes.

You can see on the right in the screenshot above that the size of the data is 432. You can then see at the bottom that I have highlighted 432 bytes (Sel 432 [1B0h]). You can also see another ‘7C261…’ starting immediately after my selection, although don’t let this fool you into thinking that these records will always be contiguous.

From here, the data is broken into 2 sections. The first section consists of various 4 byte fields with some being offsets and others being property values. The second section contains all the string based property values separated by double 0x00 bytes.

There are 3 values we can extract from the number section that are helpful.
Filesize
Offsets: Vista 178d (128+16+34), XP 114d (64+16+34)

ProductLanguage
Offsets: Vista 194d (128+16+50), XP 130d (64+16+50)

LaunchCount
Offsets: Vista 202d (128+16+58), XP 138d (64+16+58)

The string section always starts with ‘CCM_RecentlyUsedApps’ and is followed by the double 0x00 separator. If there are 4 bytes of 0x00 following, then the next string field is null. If there are 6 bytes of 0x00, then the next 2 string fields are null. Follow the pattern?

The string properties are listed in the following order:
ClassName (always “CCM_RecentlyUsedApps”)
AdditionalProductCodes
CompanyName
ExplorerFilename
FileDescription
FilePropertiesHash
FileVersion
FolderPath
LastUsedTime
LastUsername
MsiDisplayName
MsiPublisher
MsiVersion
OriginalFilename
ProductCode
ProductName
ProductVersion
SoftwarePropertiesHash

There will only be a single 0x00 at the very end of the record. Wasn’t that easy?

New Python Tool

After I determined these structures, I was chatting with Willi Ballenthin since he was involved in the research of the database structure. He said something like “that tool sounds pretty neat” and then followed up saying “possibly similar to this” and pointed me to a blog post by David Pany at FireEye.
https://www.fireeye.com/blog/threat-research/2016/12/do_you_see_what_icc.html

Sure enough, David beat me to it with a python script to search for the classname hashes and parse the record structure. The good news is that we arrived at the same basic approach and record structures. Validation is always nice. His python script is on GitHub here:
https://github.com/davidpany/WMI_Forensics/blob/master/CCM_RUA_Finder.py

I have had some trouble running this python script against my systems, but I haven’t spent the time to determine the cause. The output is a CSV file, but I don’t have any screenshots to show because of the errors I ran into.

New EnScript Tool

I decided to write this approach in EnScript. My cases have involved upwards of 500 systems for analysis. Using a python based approach would force me to either extract all those files, or use a mounting or parsing solution to expose the files. By using EnScript in EnCase v7 or v8, I can run the EnScript over all system images with one pass. I was able to successfully do this in testing on a recent case with 73 systems in the same case. EnCase proved to be a powerful tool in this specific scenario.

The EnScript starts off with a GUI to give you the option of running against all files in the case or a smaller subset designated by a blue check or tag selection.

I found records existing in OBJECTS.DATA and INDEX.BTR files. Some seem to be in areas of the file that have been deallocated from the active records of the database. Additionally, I have found quite a large number of records in the PAGEFILE.SYS file as well. You will see a selection option in the GUI for these common filenames.

The output of this EnScript is a CSV file. It includes a few columns in addition to the properties that were parsed from the records: evidence filename to indicate the system source, item path to show which file it was found in, and file offset to manually validate the data later if needed.

I encourage you to use Excel’s data deduplication function since I ran into a number of bugs in EnCase trying to make this EnScript work. There are some hacky workarounds in the code currently. Dedupe on all columns except item path and file offset. This will remove dupes that are found in both pagefile.sys and objects.data files.

I suspect we might be able to pull some of these records from unallocated clusters, but I haven’t found any there yet. Please let me know if you do!

You can grab the latest version of the EnScript on GitHub:
https://github.com/JamesHabben/ccm-rua-enscript

See the followup post about the forensic meanings.

James Habben
@JamesHabben

Windows Elevated Programs with Mapped Network Drives

This post is about a lesson that seems to be one that just won’t sink into my own head. I run into the issue time and time again, but I can’t seem to cement it in to prevent the issue from coming up again. I am hoping that writing this post will help you all too, but mostly this is an attempt to really nail it into my own memory. Thanks for the ride along! It involves the Windows feature called User Access Control (UAC) and mapped network drives.

Microsoft changed the behavior of security involving programs that require elevated privileges to run properly. Some of you may be already thinking about why I haven’t just disabled the whole UAC entirely, and I can understand that thought. I have done this on some of my machines, but I keep others with UAC at the default level for a couple of reasons. 1) It does provide an additional level of security for machines that interface with the internet. 2) I do development with a number of different scripts and languages and it is helpful to have a machine with default UAC to run tests against to ensure that my scripts and programs will behave as intended.

One of those programs that I use occasionally is EnCase. You can create a case and then drop-and-drop an evidence file into the window. When you try this from a network share, however, you get an error message stating that the path is not accessible. The cause of this has to do with Windows holding different login tokens open for each mode of your user session. When you click that ‘yes’ button to allow a program to run with the elevated privileges, you have essentially done a logout and login under a completely different user. That part is just automated in the background for user convenience so you don’t have to actually perform the logout.

Microsoft has a solution that involves opening an elevated command prompt to use ‘net use’ to perform a drive mapping under the elevated token, but there is another way to avoid this that makes things a little more usable. It just involves a bit of registry mumbo jumbo to apply the magic.

You can see in the following non-elevated command prompt that I have a mapped drive inside of my VM machine that exposes my shared folders.

Now in this elevated command prompt, you will find the lack of a mapped drive. Again, this is a shared folder through VMware Fusion, but the same applies for any mapped drive you might encounter.

The registry path that unlocks easy mode is in the following location:
HKeyLocalMachine\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System\EnableLinkedConnections

Give that reg value a DWORD value of 0x1 and your mapped network drives will now show up in the elevated programs just the same as the non-elevated programs.

Here is the easy way to make this change. Run the following command at the command prompt:
reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLinkedConnections /t reg_dword /d 1

Then you can run the following command to confirm the addition of the reg value:
reg query HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System

Mostly I am hoping that this helps me to remember this without having to spend time consulting Aunti Google, but I also hope this might give you some help as well.

James Habben
@JamesHabben

Crashing into a Hint

I haven’t spent much time looking at crash dumps, but I ran into one recently. I had a case that presented me with little in the way of sources for artifacts. It forced me to get creative, and I ended up finding a user-mode crash dump that gave me the extra information I needed. It wasn’t anything earth-shattering, but it could be helpful for some of you in the future.

The case was a crypto ransomware infection. Anti-virus scans had already wiped out most of the infection, but the question was how it got onto the box in the first place. I determined to a reasonable certainty that a malicious advertisement exploited an out of date flash plugin. The crash dump gave me the URL that loaded the flash exploit. Let’s get the basics out of the way first.

Crash Dump Files

There are several different types of user-mode crash dumps that can be created. The default, starting in Windows Vista, is to create a mini dump, but true to Windows, you can change those defaults in the registry.
The default location drops them in the user profile folder for all applications. The path looks something like this:
C:\uses\[user]\AppData\Local\CrashDumps
The filename convention is pretty simple. It starts with the name of the process. Then includes the process identifier (PID). Last is the extension of dmp. All together, it looks like this:

process.exe.3456.dmp

Forcing a Crash Dump

You can go look in that directory on your computer, and very likely find a few of those crash dumps hanging out. Any process will cause a crash dump file to be created, so it can be a great sign of user activity on the box in absence of other indicators.
If you see no files in that folder, or an absence of that folder altogether, RUN! Go get yourself a lottery ticket! It just means you haven’t used your computer for more than reading this blog post. Don’t worry though because Sysinternals has another useful tool that you can employ for giving you sample crashes.
ProcDumpis a command line tool that allows you to customize the dumps and set up all kinds of triggers on when to create the dumps. Great functionality if you are a developer tracking down that pesky bug in code, but doesn’t do much for us in forensics. Best part about this tool is that it creates the crash dumps without having to actually crash the program.
Here are the commands I used while researching this further and dropping some dummy data to use in screen shots. The number is the PID of the process that I wanted. You can use the name, but you have to make sure there is only one process with that name or it bails out. I used the PID because I was going against Internet Explorer and even a single tab creates at least two processes.
Procdump 1234
Procdump –ma 1234
The –ma switch creates a crash dump with the full process memory. Otherwise, the only difference in the dump file when using ProcDump is that the naming convention uses the current date and time instead of PID.

Analyzing the Dump File

The dump file in my case originally stuck out to me because of the timeline I built. I had a pretty specific time based on a couple other artifacts, so I crashed into it by working backwards in time. Exploit code can often crash a process when encountering unexpected versions or configurations. The flash player was probably older than expected by the code.
Fact #1: IE crashed during relevant time window.
I started by looking around for tools to analyze these dump files. I used IDA Pro and WinDbg, but decided it wasn’t giving me any useful information. I ended up going old school forensics on it.
I have some screen shots to show you the goods, but of course the names have been changed to protect the innocent. Here we go with sample data. I search for ‘SWF’ and locate several hits. One type of hit is on some properties of some sort.
Another type of hit is a structure that contains a URL of a SWF file that was loaded. Alongside that URL is another for the page that loaded the SWF URL.
At this point in my case, I took all of the URLs that I found associated with these SWF hits, and I loaded them up in VirusTotal for evaluation. Sure enough, I had one that was caught by Google. The others showed it as being clear, but this was only a few days after the infection. I checked it again a couple days later and more were detecting it as malicious.
Fact #2: Internet Explorer loaded a SWF file from a URL that has been detected as malicious.

Dump Containers

The default dump type is mini dump, which contains heap and stack data. These files contain parts of the process memory, obviously, so maybe they contain actual flash files? I wanted to find that out to confirm the infection.
The CPU does not have direct access to hard disk data, so it relies on the memory manager to map those files into memory. This means that, most of the time, files sit in memory just like they do on disk. Here is the specfor SWF files (PDF). With this information I can prepare a search for the header. I will print a snippet of the spec here for reference.
Field
Type
Comment
Signature
UI8
Signature byte:
“F” indicates uncompressed
“C” indicates a zlib compressed SWF (SWF 6 and later only)
“Z” indicates a LZMA compressed SWF (SWF 13 and later only)
Signature
UI8
Signature byte always “W”
Signature
UI8
Signature byte always “S”
Version
UI8
Single byte file version (for example, 0x06 for SWF 6)
FileLength
UI32
Length of entire file in bytes
I compare that with several SWF files that I have available, and find them to all use CWS as the header.
This means they are all compressed, and rightfully so since they are being sent over the internet. In the dump file, however, I come up with zero hits for CWS. I do locate 3 hits for FWS in the dump file.
Aha! Nailed this sucker! Now I just need to determine which of these contains the exploit code.

Carving SWF Files

Now I want to get these SWF files out of here. There is a small potential for files to be fragmented in memory, but the chances are generally pretty slim for small files like this. I start working on the headers that I have located. Fortunately, the F in FWS means that it is uncompressed. This means that the value for the file size field will be accurate since it always shows the size of the uncompressed version of the file.
The size field tells the size of the file from the start of the header. So I start my selection at the FWS and go for a length of 6919 in this file pictured.
As a confirmation of my file likely being in one piece, I see the FWS header for another SWF file following immediately after my selection. After selecting this file, I export it. I can now hash it and take the easy way out.
Now the easy way.
Dang! I do the same process for the other 2 hits, and I get the same result for all 3 of these. I have 3 SWF files loaded in my crash dump, but none of them are malicious. My curiosity is now getting the better of me, and I need to know more!
I looked on a different computer and found a crash dump from Chrome. This computer even has a newer flash plugin installed than my sacrificial VM. Now I perform the same search on this crash dump, and I find an interesting result.
The Chrome dump:
The Internet Explorer Dump:
The hits have the same version numbers and file sizes. I did some poking around inside the SWF file, and I found these to be components built into the flash player. You can see one of them in this image.
If I search one of the dumps that I made using the –ma switch of ProcDump, then I do find the exploit code. It is hidden amount many other hits. There are some funny looking strings at the top of this SWF file, but I will get to that in just a bit.

Collecting the Sample

My favorite tool for collecting web based samples is HTTrack. It has a ton of configuration options including the ability to use a custom User Agent string and to route through a proxy server, such as TOR. It is a little easier to use than wget or curl, and it easily gives me the full context of the pages surrounding the sample.
Since I found the malicious URL in the IE crash dump, I can use that to pull down the sample for further analysis.

Analyzing the Sample

Once I have the sample collected, I can now pull it apart to see what’s going on. I won’t claim to be anything other than a novice when it comes to SWF files, but there are similar behaviors used across all sorts of malicious code that can stick out.
I use a couple tools for breaking down SWF files: SWFTools and FFdec. I am not going into a ton of detail because therearemanyothersthat already cover this topic much better.
With this exploit, it is pretty obvious from just a glance that it is not a normal SWF. Take a look at this image and tell me this is normal.
A class named §1I1l11I1I1I1II1IlllIl1§, another named IIl11IIIlllIl1? Can you tell the difference between |, 1, I, l? That’s the idea!
Then there are the strings from the header we saw earlier. They look like this in the code.

Easy Analysis

Now I use the easy button to confirm what I already suspect. I send the hash to VirusTotal and find that it has a pretty strong indication.
I already know the end goal of this sample, so I don’t want to waste time on this. You can read about my new perspective in this earlier post.
Fact #3: SWF sample contains obfuscated code and has a VT score of 17/57

The Last Piece

I need one more piece to complete the findings. Knowing how these files typically get onto disk is our jobs. If it was seen on the screen, then it had to have been in memory at some point in some form. If it was in memory for some time, then there is a fair chance that it has been paged out into swap. If it came from the internet, there is a strong chance that it touched the temporary cache, even if just for a second. If it touched the cache and was cleared out, then there is a reasonable chance of pieces still sitting in unallocated clusters. Follow the logic?
I prepare a search by grabbing the first 8 bytes of the sample.
We saw earlier that SWF files can be either compressed or uncompressed, with the difference indicated by the first character. I don’t know if this SWF file will be compressed, so my keyword will account for that by not forcing a C, as the sample has. Otherwise, this has the SWF signature, the file version, and the file size. It is no SHA256, but it’s unique enough for some confirmation to be made.
? 57 53 0D 54 D4 00 00
Sure enough! The exploit SWF is located in pagefile.sys with this keyword. You can see those same broken strings and I|l1I names in there. Unfortunately, the nature of pagefile operation doesn’t always place file pieces together, nor does it even hold onto the entire copy of the file.
Fact #4: Exploit SWF code found in pagefile.sys

Putting It All Together

I walked you through some of the basic steps I used to discover the infection point. I did this without unallocated clusters, and with no browser history or cache. I put this together to challenge you.
Use your knowledge and be creative! You have a unique understanding of how many components of operating systems and applications work. Don’t get discouraged if your forensic tools don’t automagically dime out the culprit.
Here is a summary of what we found here:
Fact #1: IE crashed during relevant time window.
Fact #2: Internet Explorer loaded a SWF file from a URL that has been detected as malicious.
Fact #3: SWF sample contains obfuscated code and has a VT score of 17/57
Fact #4: Exploit SWF code found in pagefile.sys

What do you think? Enough to satisfy?

Here is the sample SWF I used for this walk through.

Be creative in your cases!
James